Shanghai, China—Aug.5, 2022—Brite Semiconductor (“Brite”), a leading custom ASIC & IP provider, today announced providing xSPI/Hyperbus^TM/Xcella^TM memory (Flash, PSRAM, MRAM…) controller and PHY solution for custom SoC. This solution is verified using memories from memory manufactures such as GigaDevice, APMemory, Cypress (Infineon), Micron, Macronix etc., which can support customers to develop better products faster in different fields.

The eXpanded Serial Peripheral Interface (xSPI) JESD251 standard, ratified by JEDEC in July 2018, defines a high-data throughput, serial interface for memory. It provides high data throughput, low pin count and is primarily for use in computing, automotive, Internet of Things (IoT), embedded systems and mobile systems, between host processing and peripheral devices. The xSPI electrical interface can deliver up to 400MT/s raw data throughput. It is mainly for nonvolatile memory devices for example NOR flash, NAND flash, a large number of memory vendors adopt it for PSRAM (Pseudo SRAM) or MRAM (Magnetic RAM). It is extensible for a higher data rate based on either a high data rate per bit or a wider data path，achieving 800MT/s.

Brite Semiconductor now can provide a total solution of xSPI controller and PHY for the advanced memory and also legacy Octal SPI, QSPI and SPI device. We adopt auto-flow-control technology to minimize the FIFO/SRAM utilization. Also another innovative feedback-sampling technology is used to increase the data rate which doesn’t have a DS, achieving maximum 400MT/s in 8D mode without DS. The solution has the following features:

• Support Flash, PSRAM and MRAM using SPI protocol

• Support Single/Dual/Quad/Octal SDR/DTR(DDR) SPI

• Support xSPI/Hyperbus^TM/Xcella^TM specification

• Support xSPI profile1 and profile2 (Hyperbus^TM)

• Support XIP (eXecute-In-Place) for fast boot

• Support AXI burst type INCR/WRAP and Fixed (single beat)

• Support AXI data width 32/64/128… bit

• Support AXI strobe width 4/8/16... bit

• Support AXI maximum burst length 256

• Support AXI outstanding command, configurable outstanding capability

• Support maximum 4 CSn

• Support 3 Bytes or 4 Bytes address

• Support single-ended or differential clock

• Support with/without DS, no performance degradation without DS

• Three clock domains: APB, AXI, xSPI clock

• xSPI clock maximum frequency 200Mhz

• Full digital PHY, 1x clock, small area, over-sampling is unnecessary

• Maximum data rate 400MT/s (DDR, DTR) or 200MT/s (SDR)

• Support arbitrary command through APB register interface (READ SFDP, ERASE etc.)

• Programmable READ/WRITE command code

• Support 2x dummy cycles (extensible dummy cycles)

Note: Hyperbus^TM is a trademark of Cypress(Infineon), Xcella^TM is a trademark of Micron.

"There is a greater demand of high throughput and low pin count for Industrial IoT, Automotive and Edge AI applications, the emergence of xSPI memory can meet such requirement,” said Yadong Liu, VP of Engineering at Brite Semiconductor. “In addition, Brite Semiconductor expands the DDR technologies to xSPI, adopting auto-flow-control and feedback-sampling technologies to achieve low area and high data rate, then provides the total solution of xSPI memory controller for the custom SoC."

About Brite Semiconductor

Brite Semiconductor is a leading custom ASIC and IP provider, and committed to provide flexible one-stop services from architecture design to chip delivery with high value and differentiated solutions.

Brite Semiconductor provides comprehensive silicon proven “YOU” IP portfolio and YouSiP (Silicon-Platform) solution. YouSiP solution provides a prototype design reference for system house and fabless to speed up the time-to-market.

Founded in 2008, Brite Semiconductor is headquartered in Shanghai, China.